EDGE New 2025 EDGE-Expert Test Tutorial (Updated 77 Questions) [Q27-Q46]

EDGE New 2025 EDGE-Expert Test Tutorial (Updated 77 Questions)

EDGE-Expert Exam Questions Dumps, Selling EDGE Products

NEW QUESTION # 27
Which of the following hot water technologies is from a renewable source?

• A. Solar hot water collectors
• B. Ground source heat pump
• C. Preheating water using waste heat from the generator
• D. High efficiency boiler for water heating

Answer: A

Explanation:
EDGE recognizes renewable energy sources for their contribution to reducing carbon emissions in hot water production. The EDGE User Guide defines renewable hot water technologies: "Solar hot water collectors are considered a renewable source in EDGE, as they directly use solar energy to heat water, reducing reliance on fossil fuel-based energy" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B, solar hot water collectors, matches this description as it harnesses solar energy, a renewable resource. Option A (ground source heat pump) uses electricity to transfer heat from the ground, which is efficient but not renewable unless the electricity is from a renewable source: "Ground source heat pumps are efficient but rely on electrical input, not classified as a renewable source in EDGE" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option C (high efficiency boiler) typically uses gas or electricity, not a renewable source: "Boilers, even high-efficiency ones, are not renewable as they burn fuel or use grid electricity" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option D (preheating water using waste heat from the generator) is a heat recovery method, not a renewable source: "Waste heat recovery improves efficiency but is not considered a renewable energy source in EDGE" (EDGE Methodology Report Version 2.0, Section 5.3: Energy Measures). Thus, solar hot water collectors (Option B) is the renewable source technology.
Reference:EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.3: Energy Measures.

NEW QUESTION # 28
A hotel developer is planning a project. The specifications are based on corporate design standards for water fittings, lighting, heating, and air-conditioning. The EDGE Base Case will:

• A. Use the local typical building practices or code.
• B. Be verified on a case-by-case basis for the hotel chain.
• C. Not be suitable for certification of this project.
• D. Be adapted to accommodate corporate specifications.

Answer: A

Explanation:
The EDGE software's Base Case is a standardized benchmark that does not adjust to project-specific corporate standards but reflects local norms. The EDGE User Guide states: "The Base Case in EDGE software is automatically generated based on local typical building practices and, where applicable, national building codes for the selected typology and location. It does not incorporate project-specific corporate standards or custom specifications, ensuring a consistent baseline for comparison" (EDGE User Guide, Section 2.3: Using the EDGE App). In this scenario, the hotel developer's corporate design standards for water fittings, lighting, heating, and air-conditioning are specific to the project, but the EDGE Base Case will still use local typical practices or codes (Option C). Option A is incorrect, as the project can still be certified using the standard Base Case. Option B is wrong because the Base Case does not adapt to corporate specifications. Option D is also incorrect, as the Base Case is not verified on a case-by-case basis for specific hotel chains but is standardized for the region and typology.
Reference:EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App; EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination.

NEW QUESTION # 29
The Client informs an EDGE Auditor that a key member of the design team has resigned. The Client requests the Auditor to take the member's place for the remainder of the project's design development as it would provide the Auditor an opportunity to identify suitable green building measures, making audit tasks much simpler. What should the EDGE Auditor do?

• A. Refer the Client to an associate within the organization who works in another department, but is qualified and available to carry out the work.
• B. Resign from the audit role on the basis that its position has been compromised by this direct approach by the Client.
• C. Refer the Client to an associate within the organization who will be working with the Auditor on the EDGE audit, since the Auditor organization has spare capacity.
• D. Accept the additional commission on the basis that this will save the Client time and money, and would reduce the volume of work required for the audit.

Answer: A

Explanation:
The EDGE framework strictly prohibits Auditors from engaging in roles that could compromise their independence, such as providing design consultancy on the same project they are auditing. The EDGE Expert and Auditor Protocols address this scenario explicitly: "An EDGE Auditor must not accept any role in the design development of a project they are auditing, as this creates a conflict of interest by blurring the lines between consultancy and independent verification. If the Client requests the Auditor to take on a design role, the Auditor should decline and may refer the Client to another qualified professional who is not involved in the audit process" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option B, refer the Client to an associate within the organization who works in another department, but is qualified and available to carry out the work, aligns with this guidance, as it maintains the Auditor's independence while helping the Client find a suitable replacement. Option A (resign from the audit role) is an overreaction, as the request itself does not compromise the Auditor's position unless accepted: "The Auditor is not required to resign unless they have already engaged in a conflicting role, which can be avoided by declining the request" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option C (accept the additional commission) is unethical, as it violates conflict-of-interest rules: "Accepting a design role on a project being audited undermines the Auditor's impartiality, as they would be auditing theirown work, which is strictly prohibited" (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (refer the Client to an associate working with the Auditor on the EDGE audit) is also incorrect, as this associate is already involved in the audit, creating a potential conflict: "Referring the Client to someone involved in the same audit does not resolve the conflict of interest, as the audit team must remain independent from design activities" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The EDGE User Guide reinforces this principle: "Auditors must maintain strict separation from design roles to ensure an unbiased audit, and should assist the Client by referring them to independent professionals if needed" (EDGE User Guide, Section 6.5:
Working with EDGE Auditors). Thus, referring the Client to a qualified associate in another department (Option B) is the correct action.
Reference:EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.1: Certification Process; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.

NEW QUESTION # 30
For which of the following is EDGE Advanced certification available?

• A. Green lease agreements
• B. Parks and landscape projects
• C. New constructions
• D. Infrastructure constructions

Answer: C

Explanation:
The EDGE Standard defines specific project types eligible for certification levels, including EDGE Advanced, which requires at least 40% energy savings. The EDGE Certification Protocol specifies: "EDGE Advanced certification is available for new constructions that achieve a minimum of 40% energy savings compared to the base case, applicable to building typologies such as homes, hotels, offices, hospitals, retail, and schools" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option A, new constructions, aligns with this scope, as EDGE focuses on new buildings across supported typologies. Option B, green lease agreements, is not a building type and is outside EDGE's certification framework. Option C, infrastructure constructions, and Option D, parks and landscape projects, are also not covered under EDGE typologies, as confirmed by the EDGE User Guide: "EDGE certification applies to new buildings and major renovations of specific typologies, excluding infrastructure or landscape-only projects" (EDGE User Guide, Section 1.2:
Scope of EDGE Certification). Thus, only new constructions qualify for EDGE Advanced certification.
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 1.2: Scope of EDGE Certification.

NEW QUESTION # 31
An EDGE Auditor has received initial documentation from a Client which implies that measures not selected on the downloaded PDF can be claimed. What should the Auditor do?

• A. The Auditor should ask for advice from the EDGE Partner and then take action.
• B. As submission documents are correct, the Auditor should ignore the error on PDF.
• C. Inform the Client to update the EDGE software and prepare a new PDF.
• D. The Auditor should modify the self-assessment and submit the project for certification.

Answer: C

Explanation:
The EDGE audit process requires that the documentation submitted by the Client accurately reflects the self- assessment in the EDGE software, ensuring consistency and transparency. The EDGE Expert and Auditor Protocols address discrepancies in documentation: "If an EDGE Auditor identifies a discrepancy between the submitted documentation and the self-assessment PDF, such as measures being claimed that were not selected in the EDGE software, the Auditor must inform the Client to update the EDGE software to reflect the correct measures and prepare a new PDF for submission. This ensures that the audit is based on an accurate representation of the project's claims" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Option C, inform the Client to update the EDGE software and prepare a new PDF, directly aligns with this protocol, as it corrects the error at the source and ensures the self-assessment matches the claimed measures. Option A (ask for advice from the EDGE Partner) is unnecessary, as the protocol provides clear guidance: "Auditors are expected to follow standard procedures for discrepancies without needing to consult the EDGE Partner, unless the issue involves a policy interpretation beyond the protocols" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option B (modify the self-assessment and submit) is unethical and prohibited, as Auditors cannot alter the Client's submission: "The Auditor must not modify the Client's self-assessment in the EDGE software, as this compromises the independence of the audit process; the Client is responsible for updating the assessment" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option D (ignore the error on PDF) is also incorrect, as ignoring discrepancies violates audit integrity: "All discrepancies between the PDF and submitted documents must be resolved before the audit proceeds, as ignoring errors could lead to incorrect certification outcomes" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). The EDGE User Guide further reinforces: "The self- assessment PDF must accurately reflect the measures selected in the EDGE software, and any mismatch requires the Client to revise the assessment to ensure a fair and transparent audit" (EDGE User Guide, Section
6.2: Documentation Requirements). Thus, the Auditor should inform the Client to update the software and prepare a new PDF (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements.

NEW QUESTION # 32
The EDGE Preliminary Certificate is issued by the EDGE:

• A. Auditor.
• B. Certification Provider.
• C. Expert.
• D. Operations and Management Team.

Answer: B

Explanation:
The issuance of certificates in the EDGE certification process is a defined responsibility assigned to specific roles. The EDGE Certification Protocol states: "The EDGE Preliminary Certificate, awarded at the design stage, is issued by the EDGE Certification Provider after the Auditor submits a recommendation for certification based on the design audit. The Certification Provider reviews the Auditor's report and, if compliant, issues the certificate" (EDGE Certification Protocol, Section 3.3: Certification Decision). Option C, Certification Provider, aligns with this process, as entities like GBCI are responsible for issuing certificates. Option A (Auditor) is incorrect, as Auditors only recommend certification: "The Auditor's role is to provide a recommendation, not to issue the certificate" (EDGE Expert and Auditor Protocols, Section 2.2:
Roles of EDGE Auditor). Option B (Expert) is also incorrect, as Experts advise on design, not certification:
"EDGE Experts assist with project design and self-assessment, not certification issuance" (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option D (Operations and Management Team) is wrong, as this team supports the overall program, not individual certifications: "The EDGE Operations and Management Team oversees program development, not certificate issuance" (EDGE Certification Protocol, Section 1.3: Program Structure). Thus, the Preliminary Certificate is issued by the Certification Provider (Option C).
Reference:EDGE Certification Protocol, Section 3.3: Certification Decision, Section 1.3: Program Structure; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert, Section 2.2: Roles of EDGE Auditor.

NEW QUESTION # 33
Which of the following is a primary resource for the EDGE Auditor when performing the site visit?

• A. Roof insulation U-value
• B. Window to Wall Ratio (WWR)
• C. EDGE software
• D. EDGE Auditor's checklist

Answer: D

Explanation:
During a site visit for post-construction certification, the EDGE Auditor relies on specific tools to verify compliance. The EDGE Expert and Auditor Protocols specify: "The primary resource for an EDGE Auditor during a site visit is the EDGE Auditor's checklist, which provides a structured list of items to verify, including the implementation of selected measures, alignment with the self-assessment, and compliance with EDGE standards" (EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures). Option C, EDGE Auditor's checklist, matches this description as the key resource guiding the audit process. Option A (EDGE software) is a tool for assessment, not a resource for the site visit: "The EDGE software is used for self-assessment and desk audits, not directly during site visits" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (roof insulation U-value) and Option D (Window to Wall Ratio) are specific data points the Auditor may verify, not primary resources: "U-values and WWR are elements to check, not tools for the Auditor" (EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures). The checklist ensures all aspects of the project are systematically reviewed, making it the primary resource (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures; EDGE Certification Protocol, Section 3.2: Audit Requirements.

NEW QUESTION # 34
Which type of evidence is required at the post-construction stage for the efficiency measure window glazing?

• A. Window schedule for the building showing the major window glass types if more than one type of glass is present
• B. Manufacturer's data sheets showing the make and model, U-value, and SHGC of the installed glass
• C. Bill of quantities with the specifications for the window glass highlighted
• D. Design building elevations marking the window glass specifications

Answer: B

Explanation:
The post-construction stage in EDGE certification requires evidence to confirm that the efficiency measures claimed in the design stage have been implemented as specified. For window glazing, which affects energy efficiency through its U-value (thermal transmittance) and SHGC (Solar Heat Gain Coefficient), the EDGE Certification Protocol provides clear requirements: "At the post-construction stage, the Client must provide manufacturer's data sheets for the window glazing measure, showing the make and model, U-value, and SHGC of the installed glass, to confirm that the glazing matches the specifications claimed in the self- assessment and meets the energy efficiency requirements" (EDGE Certification Protocol, Section 3.4: Post- Construction Requirements). Option C, manufacturer's data sheets showing the make and model, U-value, and SHGC of the installed glass, directly matches this requirement, as it provides the specific technical data needed to verify compliance. Option A (design building elevations marking the window glass specifications) is relevant at the design stage, not post-construction: "Design elevations are required at the preliminary stage to show intended glazing specifications, not after construction" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (bill of quantities with specifications highlighted) is insufficient on its own, as it may not provide detailed technical data: "Bills of quantities may support purchase verification, but manufacturer's data sheets are required for technical specifications like U-value and SHGC" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option D (window schedule showing major glass types) is helpful but not sufficient, as it lacks the detailed technical data: "Window schedules may indicate glass types, but they do not replace the need for manufacturer's data sheets with U-value and SHGC at post-construction" (EDGE User Guide, Section 6.2: Documentation Requirements). The EDGE User Guide further clarifies: "For glazing measures, post-construction evidence must confirm the installed product's performance through manufacturer's data sheets, ensuring alignment with the design-stage claims" (EDGE User Guide, Section 4.1: Insulation Measures). Thus, manufacturer's data sheets (Option C) are required at the post-construction stage.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Section 4.1:
Insulation Measures.

NEW QUESTION # 35
To maintain their licensed status, what must EDGE Auditors do?

• A. Undertake at least one building project audit every two years.
• B. Undertake at least one building project audit every three years.
• C. Attend refresher training for at least two hours every two years.
• D. Attend refresher training for at least two hours every three years.

Answer: A

Explanation:
EDGE Auditors must meet specific requirements to maintain their licensed status, ensuring they remain active and competent in their role. The EDGE Expert and Auditor Protocols provide detailed guidance: "To maintain their licensed status, EDGE Auditors must undertake at least one building project audit every two years. This requirement ensures that Auditors remain actively engaged in the certification process and maintain their practical experience in verifying EDGE projects" (EDGE Expert and Auditor Protocols, Section 5.1:
Maintaining Auditor Status). Option A, undertake at least one building project audit every two years, directly aligns with this requirement. Option B (attend refresher training for at least two hours every two years) and Option C (attend refresher training for at least two hours every three years) are incorrect, as the protocols specify a different training requirement: "EDGE Auditors must attend refresher training as required by IFC, typically every three years, but the duration is not specified as a minimum of two hours; the focus is on completing the training, not the exact hours" (EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status). Option D (undertake at least one building project audit every three years) is also incorrect, as the required frequency is every two years, not three: "A three-year interval for audits does not meet the requirement of one audit every two years, which is necessary to ensure ongoing competence" (EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status). The EDGE User Guide supports this by stating: "Auditors maintain their status by conducting at least one audit every two years, ensuring they stay familiar with EDGE standards and procedures through active practice" (EDGE User Guide, Section 6.5:
Working with EDGE Auditors). Additionally, the protocols note: "Failure to conduct an audit within two years may result in a lapse of Auditor status, requiring recertification through additional training or re- examination" (EDGE Expert and Auditor Protocols, Section 5.2: Recertification Conditions). Thus, undertaking at least one audit every two years (Option A) is the correct requirement for maintaining EDGE Auditor status.
Reference:EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status, Section5.2:
Recertification Conditions; EDGE User Guide Version 2.1, Section 6.5: Working with EDGE Auditors.

NEW QUESTION # 36
Who is responsible for paying the EDGE certification fees?

• A. EDGE Expert
• B. EDGE Client
• C. EDGE Operations and Management Team
• D. Local Green Building Council

Answer: B

Explanation:
The EDGE certification process involves various fees, including registration and certification fees, and assigns clear responsibility for their payment. The EDGE Certification Protocol explicitly states: "The EDGE Client, typically the project owner or developer, is responsible for paying the EDGE certification fees, which include the registration fee to enter the project into the system and the certification fee upon successful completion of the audit process. These fees are paid to the EDGE Certification Provider to cover the costs of certification" (EDGE Certification Protocol, Section 2.1: Registration). Option B, EDGE Client, directly aligns with this responsibility, as the Client is the party seeking certification and thus bears the financial obligation. Option A (EDGE Expert) is incorrect, as the Expert provides consultancy services and is typically paid by the Client, not responsible for certification fees: "The EDGE Expert may assist with the certification process, but the Client is responsible for all fees associated with registration and certification" (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option C (EDGE Operations and Management Team) is also incorrect, as this team oversees the EDGE program, not individual project fees: "The EDGE Operations and Management Team manages the program at a global level and does not handle or pay project- specific certification fees" (EDGE Certification Protocol, Section 1.3: Program Structure). Option D (Local Green Building Council) may act as a Certification Provider in some regions, but they receive the fees, not pay them: "Local Green Building Councils, such as those partnered with GBCI, may serve as Certification Providers, but the payment of fees is the responsibility of the Client, not the Council" (EDGE User Guide, Section 6.1: Project Preparation). The EDGE User Guide further reinforces: "The Client must budget for andpay all EDGE certification fees, ensuring timely payment to the Certification Provider to avoid delays in the certification process" (EDGE User Guide, Section 6.1: Project Preparation). The EDGE Certification Protocol adds: "Certification fees are typically invoiced by the Certification Provider, such as GBCI, and must be settled by the Client to receive the final EDGE certificate" (EDGE Certification Protocol, Section 3.3:
Certification Decision). Thus, the EDGE Client (Option B) is responsible for paying the certification fees.
Reference:EDGE Certification Protocol, Section 2.1: Registration, Section 1.3: Program Structure, Section
3.3: Certification Decision; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.

NEW QUESTION # 37
Who are licensed to train candidates as EDGE Experts and EDGE Auditors?

• A. EDGE Certification Providers
• B. Accredited EDGE Experts
• C. EDGE Auditors
• D. EDGE Faculty

Answer: D

Explanation:
Training for EDGE Experts and Auditors is a structured process managed by specific entities authorized by the IFC. The EDGE Expert and Auditor Protocols specify: "EDGE Faculty are licensed by IFC to deliver training for candidates aspiring to become EDGE Experts and EDGE Auditors. These trainers are selected and trained by IFC to ensure consistency and quality in the delivery of EDGE training programs" (EDGE Expert and Auditor Protocols, Section 3.2: Training Requirements). Option A, EDGE Faculty, directly matches this description. Option B (EDGE Auditors) is incorrect, as auditors perform audits, not training, per the protocols: "EDGE Auditors are responsible for verifying project compliance, not for training others" (EDGE Expert and Auditor Protocols, Section 2.2: Roles). Option C (EDGE Certification Providers) is also incorrect, as their role is to issue certifications, not conduct training: "Certification Providers like GBCI issue EDGE certificates but do not train candidates" (EDGE Certification Protocol, Section 1.3: Certification Process).
Option D (Accredited EDGE Experts) is wrong, as Experts advise on projects, not train others, as per the protocols: "EDGE Experts provide consultancy services to project teams" (EDGE Expert and Auditor Protocols, Section 2.1: Roles).
Reference:EDGE Expert and Auditor Protocols, Section 3.2: Training Requirements, Section 2.1: Roles, Section 2.2: Roles; EDGE Certification Protocol, Section 1.3: Certification Process.

NEW QUESTION # 38
What are the benefits of using a pool cover that are recognized in EDGE?

• A. Require less maintenance and work from employees
• B. Increase solar control and comfort
• C. Reduce chemical consumption and that of cleaning products
• D. Reduce both water and energy demand

Answer: D

Explanation:
Pool covers are a water and energy efficiency measure in EDGE, particularly relevant for hotels with swimming pools. The EDGE User Guide outlines their benefits: "Pool covers reduce water demand by minimizing evaporation and energy demand by reducing the need for heating, as they retain heat in the pool.
In EDGE, the use of pool covers is recognized for its dual impact on reducing both water and energy consumption" (EDGE User Guide, Section 5.3: Additional Water Efficiency Measures). Option B, reduce both water and energy demand, directly aligns with this description. Option A (increase solar control and comfort) is incorrect, as pool covers are not recognized in EDGE for solar control or occupant comfort but for resource savings. Option C (require less maintenance and work from employees) and Option D (reduce chemical consumption and that of cleaning products) are potential secondary benefits but are not quantified or recognized in EDGE calculations, as confirmed by: "EDGE focuses on measurable water and energy savings from pool covers, not on maintenance or chemical use reductions" (EDGE Methodology Report Version 2.0, Section 4.3: Water Efficiency Calculations). Thus, Option B is the correct answer.
Reference: EDGE User Guide Version 2.1, Section 5.3: Additional Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.3: Water Efficiency Calculations.

NEW QUESTION # 39
Which of the following is a required measure?

• A. Efficient lighting for internal areas
• B. Lighting controls
• C. Green roof
• D. Insulation of roof

Answer: D

Explanation:
In EDGE, certain measures are mandatory to ensure a baseline level of resource efficiency, while others are optional depending on the project's goals. The EDGE User Guide specifies mandatory measures for certification: "To achieve EDGE certification, projects must meet minimum requirements, including mandatory measures such as insulation of the roof to reduce heat gain or loss, ensuring a basic level of energy efficiency across all building typologies in climates where thermal performance is relevant" (EDGE User Guide, Section 4.1: Insulation Measures). Option B, insulation of roof, is identified as a required measure in EDGE, particularly in climates where heating or cooling loads are significant, which applies to most regions.
Option A (green roof) is an optional measure, not mandatory: "Green roofs are an optional measure in EDGE, contributing to energy and water savings but not required for certification" (EDGE User Guide, Section 4.5:
Additional Energy Measures). Option C (lighting controls) is also optional, as EDGE allows flexibility in lighting strategies: "Lighting controls, such as occupancy sensors, are optional measures that can enhance energy savings but are not mandatory" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures).
Option D (efficient lighting for internal areas) is encouraged but not required: "Efficient lighting for internal areas (EEM22) is an optional measure, requiring at least90% of lamps to be efficient, but projects can achieve certification without it if other energy measures meet the 20% savings threshold" (EDGE User Guide, Section
4.4: Lighting Efficiency Measures). The EDGE Certification Protocol reinforces this: "Mandatory measures like roof insulation ensure a minimum standard of energy efficiency, while measures like green roofs, lighting controls, and efficient lighting are optional and contribute to overall savings" (EDGE Certification Protocol, Section 2.2: Certification Requirements). Therefore, insulation of the roof (Option B) is the required measure among the options.
Reference:EDGE User Guide Version 2.1, Section 4.1: Insulation Measures, Section 4.4: Lighting Efficiency Measures, Section 4.5: Additional Energy Measures; EDGE Certification Protocol, Section 2.2: Certification Requirements.

NEW QUESTION # 40
An EDGE Auditor is auditing a hospital design for Preliminary Certification. The EDGE Client has included photovoltaics as one of the energy measures resulting in an overall 21% saving in energy. The Auditor observes the photovoltaics are facing the wrong direction. What action should the Auditor take?

• A. Contact the design team directly and suggest a better orientation for the photovoltaics.
• B. Reject photovoltaics from the selected set of energy measures and notify the Client regarding the orientation.
• C. Adjust the area of photovoltaic panels in the assessment to allow for reduction in energy output.
• D. Assess the energy measures as they are presented to you, without changing the photovoltaic selection.

Answer: D

Explanation:
The role of an EDGE Auditor is to verify the project's self-assessment as submitted, not to modify or redesign the project. The EDGE Expert and Auditor Protocols clearly define the Auditor's responsibilities: "During an audit, the EDGE Auditor must assess the energy measures as presented in the self-assessment, without altering the design or selections made by the Client. If discrepancies are found, such as incorrect orientation of photovoltaics, the Auditor should note the issue in the audit report but proceed with the assessment as submitted, allowing the Certification Provider to make the final decision" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option C, assess the energy measures as they are presented without changing the photovoltaic selection, aligns with this protocol. Option A (contact the design team and suggest a better orientation) oversteps the Auditor's role, as they are not to provide design advice: "Auditors must not engage in design consultancy during an audit to avoid conflicts of interest" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option B (adjust the area of photovoltaic panels) involves modifying the assessment, which is prohibited: "Auditors cannot modify the Client's self-assessment; they must evaluate it as submitted" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (reject photovoltaics and notify the Client) is also incorrect, as Auditors do not have the authority to reject measures outright: "Rejection of measures is the responsibility of the Certification Provider, not the Auditor" (EDGE Certification Protocol, Section 3.3: CertificationDecision). Thus, the Auditor should assess as presented (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.3: Certification Decision.

NEW QUESTION # 41
Water consumption savings, resulting from greywater recovery, are based on which of the following?

• A. Cost of water consumption at local tariff
• B. Base case water consumption
• C. Improved case water consumption
• D. Incremental cost of installation and cost of water consumption at local tariff

Answer: B

Explanation:
Greywater recovery in EDGE is a water efficiency measure, and the software calculates savings by comparing water consumption before and after implementing the measure. The EDGE Methodology Report explains the calculation method: "Water consumption savings from greywater recovery are calculated as the difference between the Base Case water consumption and the Improved Case water consumption after applying the measure. The Base Case represents the typical water use without any efficiency measures, serving as the benchmark for all savings calculations" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option A, Base Case water consumption, is the correct reference point for determining savings, as it establishes the baseline against which the greywater recovery measure is evaluated. Option B (Improved Case water consumption) is the result after applying the measure, not the basis for savings. Option C (cost of water consumption at local tariff) and Option D (incremental cost of installation and cost of water consumption at local tariff) relate to financial outputs, not the direct calculation of water savings, as clarified:
"Water savings in EDGE are quantified in volume (liters or cubic meters), not cost, though cost savings are derived later using local tariffs" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Thus, greywater recovery savings are based on Base Case water consumption (Option A).
Reference:EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations; EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures.

NEW QUESTION # 42
Which of the following describes a more efficient lamp?

• A. Lower watts/m²
• B. More lumens/watt
• C. Longer life
• D. Lower wattage

Answer: B

Explanation:
Lamp efficiency in EDGE is a key factor in reducing energy consumption for lighting, a critical green building design strategy. The EDGE User Guide defines lamp efficiency: "In EDGE, a moreefficient lamp is one that provides higher lumens per watt, meaning it produces more light output (lumens) for the same electrical input (watts). This metric, known as luminous efficacy, is used to evaluate lighting efficiency measures like EEM22 - Efficient Lighting for Internal Areas" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option A, more lumens/watt, directly aligns with this definition, as it indicates greater efficiency in converting electricity to light. Option B (lower watts/m²) refers to lighting power density, which is a design metric, not a lamp characteristic: "Watts/m² is a measure of lighting power density for a space, not the efficiency of an individual lamp" (EDGE Methodology Report Version 2.0, Section 5.4: Lighting Calculations). Option C (longer life) relates to durability, not efficiency: "Lamp life affects maintenance costs but is not a direct measure of energy efficiency in EDGE" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option D (lower wattage) alone does not indicate efficiency, as a lamp with lower wattage but poor light output would be less efficient: "Lower wattage must be paired with adequate lumens to improve efficiency" (EDGE Methodology Report Version 2.0, Section 5.4: Lighting Calculations). Thus, more lumens/watt (Option A) describes a more efficient lamp.
Reference:EDGE User Guide Version 2.1, Section 4.4: Lighting Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.4: Lighting Calculations.

NEW QUESTION # 43
For a project in a hot and dry climate with no air-conditioning system, which of the following will NOT have an impact on the occupants' thermal comfort?

• A. Solar shading
• B. Ceiling fans
• C. Solar photovoltaics
• D. Wall and roof insulation

Answer: C

Explanation:
In a hot and dry climate without air-conditioning, thermal comfort relies on passive design strategies that reduce heat gain or improve air movement. The EDGE User Guide discusses passive measures for thermal comfort: "In hot climates without air-conditioning, thermal comfort can be improved through ceiling fans, which enhance air movement, solar shading, which reduces solar heat gain, and wall and roof insulation, which minimizes heat transfer into the building" (EDGE User Guide, Section 3.5: Passive Design Strategies).
Option A (ceiling fans) improves air movement, directly impacting thermal comfort: "Ceiling fans increase air speed, enhancing evaporative cooling on occupants' skin" (EDGE Methodology Report Version 2.0, Section
5.5: Thermal Comfort Measures). Option B (solar shading) reduces heat gain, improving comfort: "External shading reduces solar radiation entering the building, lowering indoor temperatures" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option C (wall and roof insulation) also enhances comfort by reducing heat transfer: "Insulation lowers the U-value of the building envelope, maintaining cooler indoor temperatures" (EDGE User Guide, Section 4.1: Insulation Measures). Option D (solar photovoltaics) generates electricity but does not directly affect thermal comfort in a building without air-conditioning: "Solar photovoltaics contribute to energy supply but do not directly influence indoor thermal comfort unless used to power cooling systems, which are absent in this scenario" (EDGE Methodology Report Version 2.0, Section
5.3: Energy Measures). Thus, solar photovoltaics (Option D) will not impact thermal comfort in this context.
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies, Section 4.1: Insulation Measures; EDGE Methodology Report Version 2.0, Section 5.5: Thermal Comfort Measures, Section 5.3:
Energy Measures.

NEW QUESTION # 44
Which of the following is NOT an option for insulation in materials efficiency measures?

• A. Mineral wool
• B. Polyurethane
• C. Polypropylene
• D. Polystyrene

Answer: C

Explanation:
Insulation materials in EDGE are evaluated for their thermal performance and embodied energy as part of materials efficiency measures. The EDGE User Guide lists common insulation options: "In EDGE, insulation materials for walls, roofs, and floors include mineral wool, polyurethane,polystyrene, and fiberglass, which are selected for their low thermal conductivity and availability in most markets" (EDGE User Guide, Section
7.2: Materials Efficiency Measures). Options A (mineral wool), B (polyurethane), and D (polystyrene) are explicitly mentioned as insulation materials in EDGE. Option C, polypropylene, is not listed as an insulation material, as confirmed by the EDGE Methodology Report: "Polypropylene is a plastic material often used in packaging or pipes, but it is not recognized in EDGE as an insulation material due to its poor thermal resistance compared to standard insulation options like polystyrene or polyurethane" (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). The EDGE software's material database further excludes polypropylene from insulation options, focusing instead on materials with established thermal properties for building envelopes. Thus, polypropylene (Option C) is not an insulation option in EDGE.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.

NEW QUESTION # 45
In the EDGE certification system, who is responsible for the entire project including providing project documentation, access to the site, and the payment of audit and certification fees?

• A. EDGE Certification Provider
• B. EDGE Expert
• C. EDGE Auditor
• D. Project Owner

Answer: D

Explanation:
The EDGE certification process assigns clear responsibilities to various stakeholders to ensure a smooth and accountable process. The EDGE Certification Protocol defines the role of the ProjectOwner (also referred to as the EDGE Client): "The Project Owner, as the EDGE Client, is responsible for the entire project within the EDGE certification system. This includes providing all necessary project documentation (e.g., drawings, specifications, and self-assessments), ensuring access to the site for audits, and paying the audit and certification fees as required by the Certification Provider" (EDGE Certification Protocol, Section 2.1: Roles and Responsibilities). Option C, Project Owner, directly aligns with this comprehensive responsibility. Option A (EDGE Expert) is incorrect, as the Expert's role is advisory: "The EDGE Expert provides consultancy services, assisting with documentation and measure selection, but the ultimate responsibility for submission and payment lies with the Project Owner" (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option B (EDGE Auditor) is also incorrect, as the Auditor's role is to verify compliance, not manage the project: "The EDGE Auditor conducts independent audits and is not responsible for project management, documentation provision, or fee payments" (EDGE Expert and Auditor Protocols, Section 2.2: Roles of EDGE Auditor). Option D (EDGE Certification Provider) is responsible for issuing certificates and overseeing the process, not managing the project: "The EDGE Certification Provider, such as GBCI, reviews the Auditor's recommendation and issues certificates, but does not manage the project or pay fees" (EDGE Certification Protocol, Section 3.3: Certification Decision). The EDGE User Guide further reinforces this:
"The Project Owner must coordinate all aspects of the certification process, ensuring documentation is complete, site access is granted for post-construction audits, and all fees are paid to the Certification Provider in a timely manner" (EDGE User Guide, Section 6.1: Project Preparation). This holistic responsibility makes the Project Owner (Option C) the correct answer.
Reference:EDGE Certification Protocol, Section 2.1: Roles and Responsibilities, Section 3.3: Certification Decision; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert, Section 2.2: Roles of EDGE Auditor; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.

NEW QUESTION # 46
......

EDGE-Expert Cert Guide PDF 100% Cover Real Exam Questions: https://itcert-online.newpassleader.com/EDGE/EDGE-Expert-exam-preparation-materials.html