Feb-2024 CheckPoint 156-835 Certification Real 2024 Mock Exam
156-835 Exam Questions and Valid PMP Dumps PDF
What to Expect in the CheckPoint 156-835 Exam?
Here's What You Need To Know Before Attempting The CheckPoint 156-835 Exam
A Study guide about the preparation process for the CheckPoint 156-835 Exam
Are you looking forward to the test results for your 156-835 exam? Well, if you already got it, you probably want to know what you can do next to make the best of it.
If you are in the same situation, then the following steps may help you a great deal. These are the steps that I recommend you to follow, if you are taking the exam soon.
This is because if you don't take any action, then you will get stressed out and will not be able to concentrate properly. And this will mean that your confidence level will be low, which in turn will lead to the failure of the exam. CheckPoint 156-835 exam dumps is one of the most popular choice for the preparation of this exam.
In this article, I am going to teach you how you can prepare yourself for the upcoming exam. This includes giving you a few tips that will help you get ready for it.
I'll also give you some useful tools that will help you to prepare effectively and efficiently.
And I'll also give you some strategies that will help you to avoid stress and panic during the exam.
So if you want to improve your chances of passing this test, then read on…
CheckPoint 156-835 is a certification exam designed for IT professionals who want to prove their expertise in Check Point's Maestro technology. 156-835 exam is intended to test the candidate's knowledge and skills on various topics related to the design, deployment, and management of Check Point's Maestro infrastructure. Passing 156-835 exam demonstrates that a candidate has the expertise required to manage complex network environments and can design and deploy high-performance, secure networks that meet the needs of modern businesses.
Obtaining the Check Point Certified Maestro Expert certification can open up a wide range of job opportunities for professionals in the field of network security. It demonstrates a high level of expertise in the installation, configuration, and management of the Check Point Maestro solution, which is used by many organizations to secure their networks. Check Point Certified Maestro Expert certification can also lead to higher salaries and greater job security, as employers often prefer to hire certified professionals who have proven their skills and knowledge in the field.
NEW QUESTION # 37
What is the throughput penalty of Security Group?
- A. 10% per Security Group with no relation to amount of members
- B. 5% per member
- C. 1% per member
- D. Depends on the type of Appliance
Answer: D
NEW QUESTION # 38
What is the Iterator process?
- A. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
- B. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive
- C. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
- D. Iterator is the process that simulates distribution in case of Appliance failure
Answer: B
Explanation:
Iterator is the process that follows Appliance recovery and simulates what was a distribution if recovered Appliance was alive. The Iterator process runs on the Security Management Server and simulates the distribution of the Security Gateways if the recovered Appliance was alive. This helps ensure that the network remains secure and the traffic flow is optimized.
NEW QUESTION # 39
What is the minimal amount of cables needed in order to connect an Appliance to an Orchestrator?
- A. Three cables: uplink, downlink, SYNC
- B. One Downlink cable only
- C. Two cables: one uplink and one downlink
- D. Four cables: uplink, downlink, SYNC and Management
Answer: B
NEW QUESTION # 40
What is the max amount of Orchestrators in Dual-site setup?
- A. 4 per Security Group
- B. 0
- C. 1
- D. 2 per Security Group
Answer: B
NEW QUESTION # 41
What cannot be a reason for DETACHED status of Appliance when running asg monitor command?
- A. There's an issue with Downlink cable
- B. Appliance installed with R80.20
- C. Appliance reboots
- D. Appliance is a member of Security Group, but currently disconnected
Answer: B
NEW QUESTION # 42
There is a Security group of 10 Appliances and all of them are up and running. How many Appliances within a Security Group keep the same connection in its connection table in case of NAT?
- A. 0
- B. 1
- C. All 10
- D. Between 2 and 4
Answer: D
NEW QUESTION # 43
Which is a valid requirement for a supported Maestro appliance?
- A. At least one 10GBps line card
- B. Nothing special as Maestro supports any Check Point appliance
- C. 10GBps and 40Gbps or 100Gbps card with double-VLAN and LLDP support
- D. Line card with double-VLAN and LLDP support
Answer: C
NEW QUESTION # 44
In case of Correction, where is information about Owner stored?
- A. In Connection tables of all Appliances participating in Correction Layer flow
- B. In Correction table of Target Appliance
- C. In Connection table of Target Appliances
- D. In Correction tables of all Appliances participating in Correction Layer flow
Answer: A
NEW QUESTION # 45
What is the purpose of g_tcpdump command?
- A. Collects traffic dump from Sync network
- B. The same as tcpdump, just on Scalable Platform
- C. Collects traffic dump from CIN network
- D. Collects traffic dump from all Active Appliances within Security Group
Answer: D
NEW QUESTION # 46
One single Appliance supports 1M concurrent connections. How many concurrent connections will support Security Group of 2 Appliances?
- A. 1M
- B. 500K
- C. 2M
- D. 4M
Answer: C
NEW QUESTION # 47
What does asg monitor command do?
- A. This command does not exist
- B. Show real-time cluster status of Appliances in Security Group
- C. Monitor traffic on Appliances in Security Group
- D. Monitor health status of entire system
Answer: B
NEW QUESTION # 48
Which licenses should be issued for the Orchestrator?
- A. Depends on Software Blades enabled on connected appliances
- B. No licenses are required for Orchestrator
- C. The Orchestrator requires NGTX license
- D. The Orchestrator is considered a Management server, hence it's licensed the same way
Answer: B
NEW QUESTION # 49
Which command will be used in order to restart Orchestrator service only?
- A. orchd restart
- B. cpstop; cpstart
- C. service orchestrator restart
- D. reboot
Answer: A
Explanation:
Page 313 from the training manual:
- Restart the service:
orchd restart
- Restart the service without confirmation
service orchd restart
NEW QUESTION # 50
What cannot be a reason for "Failed to get remote orchestrator interfaces" error message, when clicking on "Orchestrator" in WebUI?
- A. Single orchestrator environment, but configured Orchestrator amount is 2
- B. One orchestrator only, but Orchestrator amount is 2 or no Sync in between orchestrators
- C. Remote orchestrator has no empty interfaces
- D. No Sync between orchestrators
Answer: C
NEW QUESTION # 51
Which command will be used in order to restart Orchestrator service only?
- A. cpstop; cpstart
- B. orchd restart
- C. reboot
- D. service orchestrator restart
Answer: D
NEW QUESTION # 52
What is the default range of physical ports for downlinks on Orchestrator MHO-140?
- A. 1 - 25
- B. 27 - 47
- C. 1 - 48
- D. 25 - 47
Answer: B
NEW QUESTION # 53
When running asg perf -v in a Dual-Site environment, we can see only Appliances from one of the sites. That means we're working in:
- A. Active / Standby HA mode
- B. Active /Active
- C. VSLS mode
- D. This is not Dual-Site, in Dual-Site we always see Appliances from both sites
Answer: A
NEW QUESTION # 54
What is the basic installation sequence of the Orchestrator in case of single Orchestrator?
1. Create a Security Group
2. Configure Default Gateway
3. Connect with Serial Console cable to the Orchestrator
4. Configure IP for one of its Management interfaces
5. Connect an appliance to a downlink port
6. Change Orchestrator amount to 1
7. Browse to the Orchestrator's WebUI
- A. 3-4-2-6-5-7-1
- B. 7-4-2-5-3-1-6
- C. 1-4-2-5-7-3-6
- D. 3-1-7-2-4-6-5
Answer: A
NEW QUESTION # 55
What is the minimal requirement for a Security Group?
- A. 1 Appliance and 1 management port
- B. 1 Appliance and 1 administrator with Multi-Domain admin permissions
- C. None, it may be empty.
- D. 2 Appliances and 2 ports
Answer: A
NEW QUESTION # 56
What is the default Distribution mode?
- A. Manual-General
- B. User
- C. Network
- D. Auto-topology
Answer: D
Explanation:
In Check Point firewall, the default Distribution mode is Auto-topology. Auto-topology uses the built-in algorithm to automatically determine the best way to distribute the traffic across the firewall cluster, based on the topology of the network and the current load on the cluster members.
Auto-topology takes into account the available bandwidth and the CPU utilization of each cluster member, and then makes decisions on how to distribute the traffic across the cluster in real-time. It is a dynamic and adaptive mode that ensures the best use of the available resources and the highest level of performance.
NEW QUESTION # 57
What is the default range of physical ports for downlinks on Orchestrator MHO-170?
- A. 1 - 16
- B. 17 - 31
- C. 3 - 16
- D. 25 - 32
Answer: B
NEW QUESTION # 58
......
156-835 Question Bank: Free PDF Download Recently Updated Questions: https://itcert-online.newpassleader.com/CheckPoint/156-835-exam-preparation-materials.html