[Oct-2024] Latest EMC D-PSC-DY-23 Certification Practice Test Questions [Q264-Q289]

Share

[Oct-2024] Latest EMC D-PSC-DY-23 Certification Practice Test Questions

Verified D-PSC-DY-23 Dumps Q&As - 1 Year Free & Quickly Updates

NEW QUESTION # 264
An Isilon administrator needs to create a new Isilon cluster to support high performance and large capacity storage for a streaming media environment.
Which node model is recommended?

  • A. S-Series
  • B. NL-Series
  • C. HD-Series
  • D. X-Series

Answer: D


NEW QUESTION # 265
You are onsite to deploy an EMC Isilon cluster that is already racked and cabled.
What serial settings must be used to initially configure this cluster?

  • A. 128,000 bps, 8 data bits, no parity, 1 stop bit, software flow control
  • B. 115,200 bps, 8 data bits, no parity, 1 stop bit, hardware flow control
  • C. 38,400 bps, 8 data bits, no parity, 1 stop bit, software flow control
  • D. 9,600 bps, 8 data bits, no parity, 1 stop bit, hardware flow control

Answer: B


NEW QUESTION # 266
Which CLI command(s) is used to identify how many snapshots are currently on disk?

  • A. isi snapshot snapshots view
  • B. isi snapshot schedules
  • C. isi snapshot settings
  • D. isi snapshot snapshots list

Answer: D


NEW QUESTION # 267
Which command provides an explanation of available isi commands?

  • A. isi --help
  • B. isi config -help
  • C. isi status
  • D. isi events list

Answer: A


NEW QUESTION # 268
What is an Ancestry Event on an Isilon cluster?

  • A. An event that affects multiple nodes.
  • B. ID that an event had prior to being quieted.
  • C. An event that has been canceled.
  • D. First instance of a coalesced event.

Answer: D


NEW QUESTION # 269
You are reviewing the Dell EMC Isilon Configuration Guide for file sizes and workflows.
Which tab in the Configuration Guide contains this information?

  • A. Core
  • B. Design Intent
  • C. Topology
  • D. Extended

Answer: B


NEW QUESTION # 270
What is an NFSv4 prerequisite?

  • A. Kerberos
  • B. NIS
  • C. Realm
  • D. DNS

Answer: D


NEW QUESTION # 271
Which feature distinguishes SMBv2 from SMBv1?

  • A. Endurant file handler
  • B. Packet signing
  • C. Stateless protocol
  • D. Change notification

Answer: A


NEW QUESTION # 272
What is a characteristic of Data Protection Advisor (DPA) cluster implementation?

  • A. Multiple cluster instances are not supported
  • B. All DPA Database nodes must be configured for clustering
  • C. A cluster can span different subnets
  • D. DPA cluster can have a mix of standalone and clustered application nodes

Answer: A


NEW QUESTION # 273
A customer has a 5-node cluster in which the SIP is answering DNS queries from node 1.
If node 1 goes down, to which node, or LNN, would the SSIP service move?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D


NEW QUESTION # 274
On an Isilon cluster running OneFS 7.2, what is the recommended maximum number of SyncIQ policies per source cluster?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 275
Which feature of the SMB protocol can be used to adjust protocol overhead?

  • A. Change notify
  • B. Stateless
  • C. Credit limits
  • D. Stateful

Answer: A


NEW QUESTION # 276
Which daemon accepts client SMB connections on an EMC Isilon cluster?

  • A. lwiod
  • B. smbd
  • C. winbindd
  • D. srvsvcd

Answer: A


NEW QUESTION # 277
Refer to the Graphic.

If you notice the symbol illuminated on the Dell EMC Isilon node's compute module, what does this indicate?

  • A. Compute module has one or more faulty components
  • B. Unsafe to reboot the compute module
  • C. Unsafe to remove the compute module
  • D. Compute module is running a system check

Answer: C


NEW QUESTION # 278
When using an X410 node containing HDDs and SSDs, which bay numbers are used to contain SSDs in the standard configurations?

  • A. Bays 31 through 36.
  • B. Bays 1 through 6.
  • C. Bays 35 and 36 only.
  • D. Bays 1 and 2 only.

Answer: B


NEW QUESTION # 279
When are file pool policy actions applied to files?

  • A. When a file is read for node pool location-based actions after the SmartPools job has run at least once
  • B. When a file is modified for the first time after the SetProtectPlus job has run at least once
  • C. When the SetProtectPlus job runs for clusters with multiple file pool policies
  • D. When a file is written for path-based filters after SmartPools job has run at least once

Answer: D


NEW QUESTION # 280
An Internet hosting company has customers requesting a total of 200 TB of storage. The hosting company currently has 50 TB of storage available.
What should be implemented to satisfy customer requirements?

  • A. Advisory user quotas
  • B. Thin provisioning
  • C. Soft user quotas
  • D. Default group quotas

Answer: B


NEW QUESTION # 281
What is the state of the source data when a failover to the target cluster has been completed?

  • A. Read/Write
  • B. Read only
  • C. Files marked as locked by One FS
  • D. Retention rules are applied

Answer: A


NEW QUESTION # 282
An Isilon cluster has ten A200 nodes and the node pool data protection level is set to N+2. The data access pattern is currently set to streaming.
If the data access pattern is changed to concurrency, how many stripes for a 1 MB file are moved to the other drive(s)?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 283
You are configuring DNS to work with SmartConnect zones.
What is the best practice recommendation to the customer?

  • A. Set TTL on A records to zero
  • B. Set TTL on NS records to zero
  • C. Use Windows-based DNS
  • D. Use Linux-based DNS

Answer: B


NEW QUESTION # 284
Which task requires preparation for successful failover?

  • A. Testing each SyncIQ policy to prepare resync policies
  • B. Using the same cluster name and IP address for source and target
  • C. Breaking the target associations of SyncIQ policies
  • D. Creating shares and exports on the target cluster

Answer: D


NEW QUESTION # 285
A company's Isilon cluster has reached the capacity limit. The cluster consists of eight H500 nodes in a single node pool.
Which action can be taken to resolve the capacity issue while new nodes are being delivered?

  • A. Activate SmartPools
  • B. Enable Spillover
  • C. Enable GNA
  • D. Release VHS drives

Answer: A


NEW QUESTION # 286
What is the estimated space savings from audit log compression on an Isilon cluster?

  • A. 50%
  • B. 90%
  • C. 25%
  • D. 75%

Answer: B


NEW QUESTION # 287
A storage administrator has an Isilon cluster consisting of 10 nodes with identical hardware and are members of a single node pool. A 1024Kb file stored on that cluster is protected at N+3n.
What is the total number of copies of the file's metadata?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 288
What is the result when SyncIQ is used to replicate a SmartLink file to OneFS 7.2.1?

  • A. Contents of the Smart Link file are copied to the destination cluster
  • B. The SyncIQ job fails
  • C. A new Smart Link file is created on the destination cluster
  • D. Data is deep copied to the destination cluster

Answer: D


NEW QUESTION # 289
......

Latest 2024 Realistic Verified D-PSC-DY-23 Dumps - 100% Free D-PSC-DY-23 Exam Dumps: https://itcert-online.newpassleader.com/EMC/D-PSC-DY-23-exam-preparation-materials.html